Siemens SINUMERIK 840D sl Operating Manual page 215

Procedure
Help screens
Help with selection of parameter F for roughing, for example.
Parameters
Parameter Description
PL Machining plane:
G18 (ZX)
Machining •
•
•
F Feedrate - (only for ∇ and ∇ + ∇∇∇)
FR Insertion for feedrate relief cuts
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Select the part program to be edited in the "Program manager"
operating area.
2. Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3. Press the "Contour turning" softkey.
4. Press the "Stock removal" softkey.
The "Stock Removal" input window opens.
1)
∇ (roughing)
∇∇∇ (finishing)
∇ + ∇∇∇ (roughing and finishing)
Programming a cycle
4.6 Contour turning
Unit
mm/rev
mm/rev
215