Siemens SINUMERIK 840D sl Operating Manual page 179

Help screens
Stock removal 1
E.g. when selecting parameter SC for roughing
Parameters
Parameter
PL
SC
F
Machining
Position
Machining
direction
X0
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
Description
Plane selection:
1)
G18 (ZX)
Safety clearance (inc)
Acts in both axes as allowance at the reference point.
Feedrate
∇ (roughing)
•
∇∇∇ (finishing)
•
Stock removal position:
External
•
Internal
•
Stock removal direction (longitudinal or transverse) in the coordinate system
Parallel to the Z axis (longitudinal)
External
Reference point in X ∅ (abs, always diameter)
Stock removal 2
Parallel to the X axis (transverse)
Internal External
Programming a cycle
4.5 Rotate
Stock removal 3
Unit
Internal
179