Siemens SINUMERIK 840D sl Operating Manual page 192

Programming a cycle
4.5 Rotate
Procedure for longitudinal thread, tapered thread, or face thread
Help screens
Help with selection of parameter P for longitudinal thread, for example
192
1. Select the part program to be edited in the "Program manager"
operating area.
2. Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3. Press the "Turning" softkey.
4. Press the "Thread" softkey.
The "Thread" input window opens.
5. Press the "Longitudinal thread" softkey.
The "Longitudinal Thread" input window opens.
- OR
Press the "Tapered thread" softkey.
The "Tapered Thread" input window opens.
- OR
Press the "Face thread" softkey.
The "Face Thread" input window opens.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning