Siemens SINUMERIK 840D sl Operating Manual page 218

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Programming a cycle

Help with selection of parameter RP, for example.

Select the part program to be edited in the "Program manager"

operating area.

Press the "Open" softkey or the "INPUT" key to edit the part program

in the editor.

Press the "Milling" softkey.

Press the "Face milling" softkey.

The "Face Milling" input window opens.

Machining plane:

Retraction plane (abs)

Safety clearance (inc)

Acts in relation to the reference point. The direction in which the safety clearance

is active is automatically determined by the cycle.

Operating Manual, 01/2008, 6FC5398-7AP10-0BA0

HMI sl Turning