User data
5.1
Overview
The defined user data may be displayed in lists.
The following variables can be defined:
● Data parameters (R parameters)
● Global user data (GUD) is valid in all programs
● Local user data (LUD) is valid in one program
● Program-global user data (PUD) is valid in one program and the called subroutines.
Channel-specific user data can be defined with a different value for each channel.
Entering and displaying parameter values
Up to 15 positions (including decimal places) are evaluated. If you enter a number with more
than 15 places, it will be written in exponential notation (15 places + EXXX).
LUD or PUD
Only local or program-global user data can be displayed at one time.
Whether the user data are available as LUD or PUD depends on the current control
configuration.
Note
Reading and writing variables protected
Reading and writing of user data are protected via a keyswitch and protection levels.
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
5
265