Settings For Teach-In - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Teaching in a program
6.7 Settings for teach-in
6.7
Settings for teach-in
In the "Settings" window, you define which axes are to be included in the teach-in block and
whether motion-type and continuous-path mode parameters are to be provided.
Proceed as follows
286
1.
Select the "Machine" operating area.
2.
Press the "AUTO" or "MDA" key.
3.
Press the "TEACH IN" key.
4.
Press the "Teach prog." softkey.
5.
Press the ">>" and "Settings" softkeys.
The "Settings" window appears.
6.
Under "Axes to be taught" and "Parameters to be taught", select the
check boxes for the relevant settings and press the "Accept" softkey to
confirm the settings.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning
Advertisement
Table of Contents
