Siemens SINUMERIK 840D sl Operating Manual page 187

Parameter
VX
1) Parameter description refers to plane G18; plane selection G17 or G19 possible in selection field
(MD 52006: $MCS_DISP_PLANE_TURN)!
Parameters of undercut form F
Parameter
PL
SC
F
Position
X0
Z0
X1
Z1
VX
1) Parameter description refers to plane G18; plane selection G17 or G19 possible in selection field
(MD 52006: $MCS_DISP_PLANE_TURN)!
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
Description
Cross feed ∅ (abs) or cross feed (inc)
Description
Machining plane:
1)
G18 (ZX)
Safety clearance (inc)
Acts in both axes as allowance at the reference point.
Feedrate
Form F machining position:
•
•
•
•
Undercut size according to DIN table:
E.g.: F0.6 x 0.3 (undercut form F)
Reference point in X ∅
Reference point in Z
Allowance in X ∅ (abs) or allowance in X (inc)
Allowance in Z (abs) or allowance in Z (inc) – (for undercut form F only)
Cross feed ∅ (abs) or cross feed (inc)
Programming a cycle
4.5 Rotate
Unit
mm
Unit
rpm
mm
mm
mm
mm
mm
187