Tool management
7.7 Tool data OEM
Multiple load points
If you have configured several loading points for a magazine, then the "Load Point Selection"
window appears after pressing the "Load" softkey.
Select the required load point and confirm with the "OK" softkey.
7.7
Tool data OEM
In the OEM tool list, you can customize a list according to your specific needs.
References:
For more information, refer to the following references:
HMI sl / SINUMERIK 840D sl Commissioning Manual
Procedure
310
1.
Select the "Parameter" operating area.
2.
Press the "OEM tool" softkey.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning