Siemens SINUMERIK 840D sl Operating Manual page 167

Procedure
Help screens
Help with selection of parameter RP, for example.
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Select the part program to be edited in the "Program manager"
operating area.
2. Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3. Press the "Drilling" softkey.
4. Press the "Thread" softkey.
The "Tapping" input window opens.
Programming a cycle
4.4 Drilling
167