3D View; 4-Window - Siemens SINUMERIK 840D sl Operating Manual

3.10.5.2

3D view

Changing the display
You can increase or decrease the size of the simulation graphic, move it, turn it, or change
the segment.
3.10.5.3

4-window

Changing the display
You can increase or decrease the size of the simulation graphic, move it, turn it, or change
the segment.
The segment changes for the side view and front view synchronously. The segment of the
3D view cannot be changed here.
3.10.5.4 2-window
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Start the simulation.
2. Press the "3D view" softkey.
1. Start the simulation.
2. Press the "Additional views" and "4-window view" softkeys.
The top two windows in the 4-window view contain a side view and a
front view (left and right top window).
The bottom two windows provide a view of the work space and a 3D
view of the workpiece.
1. Start the simulation.
2. Press the "Additional views" and "2-window view" softkeys.
The 2-window view contains a side view (left-hand window) and a front
view (right-hand window) of the workpiece. The viewing direction is
always from the front to the cutting surface even if machining is to be
performed from behind or from the back side.
Machining the workpiece
3.10 Simulating a machining operation
121