Short-Cut Menu To Register Camera; Image - Unisight EmPower NVR User Manual

Step 7 Click Finish to complete the setup.

3.2.3 Short-Cut Menu to Register Camera

If you have not register a remote device to a channel, please go to the preview interface to add.
Step 1 On the preview interface,
Move your mouse to the center, there is an icon "+". See Figure 3-45.
Click " +", device pops up interface to add network camera. Refer to chapter 3.1.4.4 Registration
Step 2
for detailed information.

3.2.4 Image

It is to set network camera parameters according to different environments. It is to get the best video
effect.
From main menu->setting->camera->image, you can see the image interface is shown as below. See
Figure 3-46.
Figure 3-44
Figure 3-45
48