Unisight EmPower NVR User Manual page 31

Note
⚫
After auto-check is enabled, in order to inform you of the latest firmware upgrades, we will collect
your personal information such as IP address, device name, firmware version and device SN. The
collected information is used for verifying device legality and pushing upgrade notice.
3.1.4.1 General
It is to set NVR basic information such as system date, holiday and etc.
General
It is to set device basic information such as device name, serial number and etc.
Please follow the steps listed below.
Step 1 Click Next button,
Enter General interface.
Step 2 Click General button.
The interface is shown as below. See Figure 3-12.
Note
From Main menu->Setting->System->General->General, you can go to the general
interface.
Step 3 Set parameters.
⚫
Device ID: Please input a corresponding device name here.
⚫
Device No: When you are using one remote control (not included in the accessory bag) to
control several NVRs, you can give a name to each NVR for your management.
⚫
Language: System supports various languages: Chinese (simplified), Chinese (Traditional),
English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight
difference maybe found in various series.)
⚫
Video standard: There are two formats: NTSC and PAL.
Figure 3-11
18