Unisight EmPower NVR User Manual page 296

You need to configure the B/W list before using the B/W alarm linkage. For details, see 3.7.7.2 B/W List.
⚫
Regular: System activates alarm when any car plate is detected.
⚫
Blacklist: System activates alarm only when plates in the black list is detected.
⚫
Whitelist: System activates alarm only when plates in the white list is detected.
Step 5 Configure the parameters.
Step 6 Click OK to save the configuration.
4.11.3.7.2
B/W List
It is to set the blacklist and the whitelist. It includes adding, deleting, importing and exporting blacklist and
whitelist.
After setting the blacklist and whitelist, in the plate snapshot list on the preview interface, the blacklist
plate number is red, the whitelist plate number is green and the regular plate number is white.
Adding B/W List
Step 1 Select Setup > Event > ANPR > B/W List.
The B/W list is diaplayed. See Figure 4-90.
Step 2 Enter the plate number and selecy whitelist or blacklist in the drop-down list.
Step 3 Click Add to complete the registration.
Deleting B/W List
In the Type list, select whitelist, blacklist or all and click Search, system displays the detailed information.
See Figure 4-91.
⚫
Select the check box in front of the plate number and click Delete to delete the plate info in the list.
You can also click
⚫
Click Clear to delete all the information in the B/W list.
corresponding to the plate number to delete it.
Figure 4-90
283