Unisight EmPower NVR User Manual page 261

Subnet Mask
Default Gateway
Start IP/End IP
Upgrade
4.11.2.4 Wi-Fi
Please note this function is for the device of Wi-Fi module.
The Wi-Fi interface is shown as in Figure 4-37.
Please check the box to enable Wi-Fi function and then click the Search SSID button. Now you can view
all the wireless network information in the following list. Double click a name to connect to it. Click
Refresh button, you can view latest connection status.
4.11.2.5 3G
4.11.2.5.1 CDMA/GPRS
The CDMA/GPRS interface is shown as in Figure 4-38.
NVR Wi-Fi AP.
The IP address and default gateway shall be in the same
network segment.
Input start IP and end IP of DHCP server. The NVR device can
allocate the IP address in the range you specified here.
Click it to upgrade Wi-Fi AP module.
Figure 4-37
248