Unisight EmPower NVR User Manual page 318

Display
intelligent
rule(s)
4.11.5.2.2 Tour
The tour interface is shown as in Figure 4-122. Here you can set tour interval, split mode, motion detect
tour and alarm tour mode.
Please refer to the following sheet for detailed information.
Parameter
Enable tour
Interval
Split
Motion
tour/Alarm
tour
4.11.5.2.3
Custom Split
From main menu->Setup->System->Display->Custom split, the interface is shown as in Figure 4-123.
Here you can set customized split mode.
Note
⚫
This function is for some series products. Please refer to the actual product for detailed information.
needs to input user name and password to login again.
Check the box to enable IVS function, system can display IVS rule
on the preview interface.
Figure 4-122
Function
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
305