Unisight EmPower NVR User Manual page 51

Note
⚫
When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, please enable
the channel snapshot function when corresponding alarm occurs. For example, when the
alarm type is MD, from main menu->Setting->Event->Video Detect->Motion Detect, please
select the snapshot channel and enable snapshot function. See Figure 3-33.
⚫
When the snapshot type is MD (motion detect), alarm, MD&Alarm, IVS, refer to chapter 3.7.1
Video detect, chapter 3.7.9 Alarm Settings, chapter 3.7.3 IVS and chapter 3.7.12 POS.
Step 5 Refer to chapter 0 to set snapshot period.
Step 6 Click Apply button to save snapshot plan.
Note
Please enable auto snapshot function so that the snapshot plan can become activated. Refer to
chapter 0 Record control for detailed information.
Step 7 Click Finish button, system pops up a dialogue box. Click the OK button, the startup wizard is
complete. See Figure 3-34.
Figure 3-32
Figure 3-33
38