Parameter Function
HDD full
Pack
duration
Auto
delete old
files
4.11.4.2 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure 4-106.
There are four record modes: general (auto), motion detect, alarm and MD&alarm. There are six periods
in one day.
You can view the current time period setup from the color bar.
⚫
Green color stands for the general record/snapshot.
⚫
Yellow color stands for the motion detect record/snapshot..
⚫
Red color stands for the alarm record/snapshot.
⚫
Blue color stands for MD&alarm record/snapshot.
It is to select working mode when hard disk is full. There are two options:
stop recording or rewrite.
Stop: If current HDD is full while there is no idle HDD, then system
⚫
stops recording,
⚫
Overwrite: If the current HDD is full while there is no idle HDD, then
system overwrites the previous files.
It is to specify record duration. The max value is 120 minutes.
⚫
Never: Do not auto delete old files.
⚫
Customized: input customized period here, system can auto delete
corresponding old files
Figure 4-106
293