Unisight EmPower NVR User Manual page 247

Parameter Function
Manufacturer Please select from the dropdown list.
Different series products may support different manufacturers, please refer
to the actual product.
IP address Input remote device IP address.
Input RTSP port of the remote device. The default setup is 554.
RTSP port
Skip this item if the manufacture is private or customize.
Input HTTP port of the remote device. The default setup is 80.
HTTP port
Skip this item if the manufacture is private or customize.
TCP port Input TCP port of the remote device. The default setup is 37777.
User
The user name and password to login the remote device.
name/password
Input channel amount or click the Connect button to get the channel amount
of the remote device.
Channel No.
We recommend click Connect button to get remote device channel amount,
the manual add operation may result in failure if the input channel amount is
not right.
After getting the remote device channel amount, click Setup to select a
channel.
Remote
channel No.
Click to select one or more remote channel numbers here.
The local channel number you want to add. One channel name has
Channel
corresponding one channel number.
Decode buffer There are three item: realtime, local, fluent.
There are four items: auto/TCP/UDP/MULTICAST(ONVIF device only)
⚫
Service type
⚫
⚫
Note
Note
Note
Note
Note
Note
The default connection mode is TCP if the connection protocol is
private.
There are four items including Auto, TCP, UDP and MULTICAST if the
connection protocol is ONVIF.
There are two items including TCP and UDP if the connection protocol
is from the third-party.
234