Unisight EmPower NVR User Manual page 168

⚫
Encryption Type: Select encryption type from the dropdown list.
⚫
Channel: Please select a channel from the dropdown list. The default setup is auto.
⚫
Gain: There are three options: High/middle/low. Please select from the dropdown list.
3.8.1.3.2 Advanced
Click Advanced and you can see an interface shown as below. See
Figure 3-167.
⚫
IP Address: Input Wi-Fi AP IP address.
⚫
Subnet Mask: Input Wi-Fi AP subnet mask.
⚫
Default Gateway: Input Wi-Fi AP gateway.
⚫
Start IP/End IP: Input start IP and end IP of the network cameras. The NVR can allocate the IP
addresses in the range you specified here.
⚫
Upgrade: Click it to upgrade Wi-Fi AP module.
Figure 3-166
155