Unisight EmPower NVR User Manual page 333

f) System may check newly added IP address exists or not. System does not add if input IP
address does not exist.
⚫
Delete: Click it to remove specified item.
⚫
Edit: Click it to edit start address and end address. See Figure 4-145. System can check the IP
address validity after the edit operation and implement IPv6 optimization.
⚫
Default: Click it to restore default setup. In this case, the trusted sites and blocked sites are both null.
Step 4 Click Save to complete setup.
⚫ If you enabled trusted sites, only the IP in the trusted sites list can access the device.
⚫ If you enabled blocked sites, the IP in the blocked sites cannot access the device.
4.11.5.9 Auto maintain
The auto maintain interface is shown as in Figure 4-146.
Here you can select auto reboot and auto delete old files interval from the dropdown list.
If you want to use the auto delete old files function, you need to set the file period.
Click Manual reboot button, you can restart device manually.
Figure 4-144
Figure 4-145
320