Smart Search Playback - Unisight EmPower NVR User Manual

Click Backup to begin the process.

3.6.3 Smart Search Playback

Note
This function is for some series product only.
During playback process, it can analyze the motion detect zone in the scene and give the analysis
result.
This function is
menu->Setting->Event->Video detect->Motion detect).
Please follow the steps listed below.
Step 1 Select a channel to playback video and then click
video.
Note
⚫ This function is for one-channel playback mode.
⚫ If you are in multiple-channel playback mode, double click a channel first to switch to
one-channel playback mode.
Step 2 Left click mouse and then drag to select smart search zones(22*18（PAL）, 22*15（NTSC）).
Step 3 Click
record footages.
Step 4 Click again to stop smart search function.
for channel that
to go to smart search and playback. System is going to playback all motion detect
Figure 3-95
already enabled
. You can view the grids on the playback
motion detect function (main
91