Quick Settings - Unisight EmPower NVR User Manual

Step 6 Input new password and then confirm.
The password can be set from 8 characters through 32 characters and contain at least two types
from number, letter and special character (excluding"'", """, ";", ":" and "&"). It is recommended to
set password of high security according to the prompts.
Step 7 Click OK button to complete the setup.

3.1.4 Quick Settings

After you successfully initialize the device, it goes to startup wizard. Here you can quickly configure your
device. It includes general setup, basic network setup, camera registration, P2P, and schedule interface.
Note
⚫
Once the power is off during the quick settings process, you need to go through startup wizard again
when the device boot up the next time.
⚫
After completing all items on the startup wizard, the startup wizard automatically hides when the
device boot up the next time.
Please follow the steps listed below.
Boot up the device and complete the device initialization. Device goes to startup wizard. See Figure 3-11.
⚫
Select Auto-check for updates, device automatically checks if there is new applications or not every
day.
Figure 3-10
17