Table of Contents
Advertisement
2)
Compile the two MIB files with MIB Builder.
3)
Load the compiled module to the software with MG-SOFT MIB Browser.
4)
Enter the PC IP address into MG-SOFT MIB Browser and select the version to search.
5)
Expand the tree list in MG-SOFT MIB Browser to view the device configuration information,
such as channel number and program version.
3.8.1.12 Multicast
When multiple users preview the video of a channel through the network at the same time, due to network
bandwidth limitation, they might be unable to preview. You can set a multicast IP for NVR device
(224.0.0.0 - 238.255.255.255) and adopt the way of multicast protocol access to solve the problem.
Step 6
Enter from main menu > Setup > Network > Multicast.
The Multicast interface is shown as in Figure 3-181.
Step 7
Select the Enable check box to enable this function.
Step 8
Configure the parameters. For details, see the following table.
Parameter
IP Address
Port
Step 9
Click Apply or OK to complete the setting.
After configuring the multicast, you can log in Web with multicast.
Log in Web. In the Type drop-down list, select Milticast. See Figure 3-182. System will
automatically obtain the multicast address and join the muiticast goup. Open the monitor and
you can view the video in multicast way.
Figure 3-181
Description
Enter
the
multicast
(224.0.1.0-238.255.255.255).
Enter the multicast port number to access the device (1025-65000).
IP
address
to
access
the
device
170
Hide quick links:
Advertisement
Table of Contents
