Unisight EmPower NVR User Manual page 169

3.8.1.4 Wi-Fi
The Wi-Fi interface is shown as below. See Figure 3-168.
⚫
Enable: Check the box here to enable Wi-Fi function.
⚫
Refresh: You can click it to search the hotspot list again. It can automatically add the information
such as the password if you have set it before.
⚫
Disconnect: Here you can click it to turn off the connection.
⚫
Connect: Here you can click it to connect to the hotspot. System needs to turn off current connection
and then connect to a new hotspot if there is connection of you selected one.
Figure 3-167
156