Unisight EmPower NVR User Manual page 32

⚫
HDD full: Here is for you to select working mode when hard disk is full. There are two
options: stop recording or rewrite old files.
⚫
Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120
minutes. Default value is 60 minutes.
⚫
Realtime play: It is to set playback time you can view in the preview interface. The value
ranges from 5 to 60 minutes.
⚫
Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
⚫
Monitor channels when logout: Here you can set channels you want to view when your
account has logged out. Click the button and then cancel the channel name box, you need
to login to view the corresponding video. The channel window displays
interface.
⚫
Navigation bar: Check the box here, system displays the navigation bar on the interface.
⚫
IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.
⚫
Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.
⚫
Mouse sensitivity: You can set double click speed via dragging the slide bard. You can Click
Default button to restore default setup.
Step 4 Click Apply button to save settings.
Date and Time
Figure 3-12
in preview
19