Unisight EmPower NVR User Manual page 40

2) Click
Mobile App supports device initialization.
3) Select Wired Device -> P2P to enter the P2P interface.
4) Click the QR code icon behind the SN to enter the QR code scan interface.
5) Scan the device label or scan the SN QR code got by entering from main menu -> Setup ->
Network -> P2P. When the scan is successful, the device SN will be displayed in the SN
item.
6) Enter name and password.
Step 4 After device registraion on mobile App, click Start Preview and you can see the monitor screen.
3.1.4.4 Wi-Fi AP
3.1.4.4.1 General Settings
Configure the Wi-Fi parameters of the NVR device to make the Wi-Fi IPC automatically connect to it via
this Wi-Fi.
⚫
This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation.
⚫
When the Wi-Fi IPC and NVR are corollary devices, they can be paired automatically after device
startup.
Step 1 From main menu > Setting > Network > Wi-Fi AP > General.
The General interface is displayed. See Figure 3-20.
and enter the Add Device interface.
Figure 3-19
27