Unisight EmPower NVR User Manual page 55

Note
If it is to change several devices IP addresses at the same time, please input incremental value.
Device can add the fourth address of the IP address one by one to automatically allocate the IP
addresses.
If there is IP conflict when changing static IP address, device pops up IP conflict dialogue box. If
batch change IP address, device automatically skips the conflicted IP and begin the allocation
according to the incremental value
Step 3 Input remote device user name and password.
Step 4 Click OK button to save settings.
After the changing operation, search again, device displays new IP address.
Note
When change IP addresses of several devices at the same time, make sure the cameras user
name and passwords are the same.
3.2.1.2 IP Export
Device can export the Added device list to your local USB device.
Step 1 Insert the USB device and then click the Export button.
Enter the following interface. See Figure 3-38.
Step 2 Select the directory address and then click the OK button.
Step 3 Device pops up a dialogue box to show the export is successful. Click OK button to exit.
Note
Backup encryption is enabled by default when exporting files. The file information includes IP
address, port, remote channel number, manufacturer, user name and password.
⚫
When you enable backup encryption, the extension name of the exported file is .backup. All
the other softwares cannot open the file to edit except the NVR device.
Figure 3-38
42