Unisight EmPower NVR User Manual page 264

Preparation
Before the operation, check the DDNS type that the device supports.
⚫
If the DDNS type is Quick DDNS. You do not need to register the domain name.
⚫
If the DDNS is some other type, log in the website of the DDNS provider and register information like
domain name.
After you register the device and log in the DDNS website, you can view all connected device information
of the current user.
Step 1 Enter from main memu > Setup > Network > DDNS.
DDNS setup interface is shown as in Figure 4-41.
Step 2 Select the Enable check box.
After enabling DDNS, the third-party server might collect your device information.
Step 3 Select the DDNS type and configure the parameters. For details, see the below table.
Parameter
Server Type
Address
Domain Name
User
Figure 4-41
Description
You can select DDNS protocol from the dropdown list and then
enable DDNS function.
DDNS server IP address list:
⚫
Dyndns DDNS: members.dyndns.org.
⚫
NO-IP DDNS: dynupdate.no-ip.com.
⚫
CN99 DDNS: members.3322.org.
When the DDNS type is NO-IP DDNS, some series will display
the Test button. Click Test and you can detect if the device has
registered successfully.
Your self-defined domain name.
The user name you input to log in the server.
251