Unisight EmPower NVR User Manual page 119

⚫
Record Delay: System can delay the record for specified time after alarm ended. The value ranges
from 10s to 300s.
⚫
Tour: Here you can enable tour function when alarm occurs. System one-window tour.
⚫
Snapshot: You can enable this function to snapshot image when a motion detect alarm occurs.
⚫
Video matrix Check the box here to enable this function. When an alarm occurs , SPOT OUT port
displays device video output. It displays video (1-window tour) from alarm activation channel you
select at the Record channel item.
⚫
Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.
Please highlight icon
button, system goes back to the previous menu.
Note:
In motion detection mode, you cannot use copy/paste to set channel setup since the video in each
channel may not be the same.
In Figure 3-110, you can left click mouse and then drag it to set a region for motion detection. Click Fn to
switch between arm/withdraw motion detection. After setting, click enter button to exit.
to select the corresponding function. After all the setups please click save
Figure 3-109
106