Video Output Standard And Vga Setup; Camera Name And Osd Setup - Unisight TZHEF08 User Manual

Digital Video Network Surveillance System
status, you can use numeric keys to input new device ID. The device ID value is
ranged among 01-255.
After you finish the modification, press "Confirm" button to save and take effect
or press "Cancel" to abort modification.

5.4 Video Output Standard and VGA Setup

Video output standard
There is one VOUT BNC connector at the rear panel of DVR. It is used to
connect with analog monitor and can support PAL or NTSC video output. You can
modify video output standard to match video input.
In "Display" menu: There is a list box named "Video Output Standard", you can
use[ ][ ]key to select PAL or NTSC video output.
VGA setup
There is one VGA interface at the rear panel of DVR. You can use it to connect
with VGA display. You can define VGA resolution, refresh frequency in "Display"
menu.
There are following options: 1280*1024/60Hz,1024*768/60Hz, 800*600/60Hz.
You can use[ ][ ]key to select.
Press "Confirm" button to save or "Cancel" to abort.

5.5 Camera name and OSD Setup

Camera Name
In "Camera" menu, you can define name for each camera. Please notice that
camera's name can not be copied. Shown as fig 5.9
Unisight Digital Technologies, Inc.
39