Table of Contents
Advertisement
One click to create RAID
Click it to automatically create RAID5.
⚫
For create RAID function, you can select the physical HDD that does not included in the RAID group
⚫
or the created disk array to create a RAID5. You can refer to the following situations:
⚫
There is no RAID, no hotspare disk: System directly creates the RAID5 and creates one hotspare
disk at the same time.
⚫
There is no RAID, but there is a hotspare disk: System creates the RAID5 only. It uses previous
hotspare disk.
There is RAID: System cancel the previous RAID setup and then create the new RAID5. System
⚫
creates the hotspare disk if there is no one. System uses previous hotspare disk if there is hotspare
disk available.
The background will format the virtual disk.
⚫
Create manually
Step 1
Select RAID type first and then follow the prompts to set HDD amount.
Step 2
Click Create Manually button, system pops up dialogue box to warning you it is going to clear all
data.
Step 3
Click OK button to complete the operation.
Note
Click
to delete RAID.
3.9.9.2 Hotspare disks
When a HDD of the RAID group is malfunction or abnormal, the hotspare HDD can replace the
malfunction or abnormal HDD in case there is any data loss. It is to guarantee storage system reliability.
Click Hotspare disks tab name, you can add the hot spare HDD. See Figure 3-202. The type includes two
options:
Figure 3-201
188
Hide quick links:
Advertisement
Table of Contents
