Unisight EmPower NVR User Manual page 47

Step 2 Set parameters.
⚫ Channel: Please select the channel number first. You can select "all" if you want to set for
the whole channels.

: Sync connection icon. Select icon
edited or together. Now the icon is shown as

: Click it to delete a record type from one period.
⚫
Record Type: Please check the box to select corresponding record type. There are six
types: Regular/MD (motion detect)/Alarm/MD&Alarm/IVS/POS.
⚫
Week day: There are eight options: ranges from Saturday to Sunday and all.
⚫
Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main
Menu->Setting->System->General) to add holiday first. Otherwise you cannot see this item.
⚫
Pre-record: System can pre-record the video before the event occurs into the file. The value
ranges from 1 to 30 seconds depending on the bit stream.
⚫
Redundancy: System supports redundancy backup function. It allows you backup recorded
file in two disks. You can highlight Redundancy button to activate this function. Please note,
before enable this function, please set at least one HDD as redundant. (Main
menu->Setting->Storage->HDD Manager). Please note this function is null if there is only
one HDD.
⚫
ANR: It is to save video to the SD card of the network camera in case the network
Figure 3-25
of several dates, all checked items can be
.
34