Unisight EmPower NVR User Manual page 310

⚫
Week day/Period: Please select from the dropdown list and for each day, you can set two periods.
⚫
Type: Please select uploaded record type (Alarm/intelligent/motion detect/regular). Please check the
box to select upload type.
4.11.4.4 Record Control
The interface is shown as in Figure 4-112.
Please refer to the following sheet for detailed information.
Parameter
Channel
Status
Schedule
Manual
Figure 4-112
Function
Here you can view channel number.
The number displayed here is the max channel amount of your
device.
There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).
It has the highest priority.
Enable corresponding channel to record no matter what period
applied in the record setup.
297