Unisight EmPower NVR User Manual page 73

right-click menu are for screen 1 only.
3.3.2.3 Output Screen
Click
3.3.2.4 Previous screen/next screen
Click to go back to the previous screen, click
3.3.2.5 Tour
Click button to enable tour, the icon becomes
Note
Close the tour or the triggered tour operation has cancelled, device restore the previous preview video.
3.3.2.6 PTZ
Click , system goes to the PTZ control interface. Please refer to chapter 3.4.2 PTZ for detailed
information.
3.3.2.7 Color
Click button , system goes to the color interface. Please refer to chapter 3.3.6.1 Color for detailed
information.
Please make sure system is in one-channel mode.
3.3.2.8 Image
Click to go to the image interface. Please refer to chapter 3.2.4 Image for detailed information.
Please make sure system is in one-channel mode.
3.3.2.9 Search
Click button , system goes to search interface. Please refer to chapter 3.6.2 Search for detailed
information.
3.3.2.10 Broadcast
Click to go to broadcast interface. Select a group name and then click
broadcast. Please refer to chapter 3.10.5 Broadcast for detailed information.
3.3.2.11 Alarm Status
Click button , system goes to alarm status interface. It is to view device status and channel status.
Please refer to chapter 3.10.2.3.1 Alarm status for detailed information.
3.3.2.12 Channel Info
Click button , system goes to the channel information setup interface. It is to view information of the
corresponding channel. See Figure 3-60.
to select corresponding window-split mode and output channels.
to go to the next screen.
, you can see the tour is in process.
to begin
60