Unisight EmPower NVR User Manual page 186

Here we use cell phone APP to continue.
Step 1 Use cell phone to scan the QR code and download the APP.
Step 2 After installation, run the APP and Live Preview, enter the main interface. Now you can add
device to the APP.
1. Open App; tap
2. Tap
3. Tap Device manager button, you can use several modes (P2P/DDNS/IP and etc.) to add
the device. Click
video from the connected device. See Figure 3-186.
Figure 3-185
to go to the Live preview.
at the top left corner, you can see the main menu.
to save current setup. Tap Start Live preview to view all-channel
173