Unisight EmPower NVR User Manual page 270

4.11.2.13 Alarm Centre
The alarm center interface is shown as below. See Figure 4-47.
This interface is reserved for you to develop. System can upload alarm signal to the alarm center when
local alarm occurs.
Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send
out data as the protocol defined, so the client-end can get the data.
4.11.2.14 HTTPS
In this interface, you can set to make sure the PC can successfully login via the HTTPS. It is to guarantee
data communication security. The reliable and stable technology can secure the user information security
and device safety. See Figure 4-48.
Note
⚫
You need to implement server certificate again if you have changed device IP.
⚫
You need to download root certificate if it is your first time to use HTTPS on current PC.
Figure 4-46
Figure 4-47
257