Unisight EmPower NVR User Manual page 308

Parameter
Copy
4.11.4.3 HDD Manager
4.11.4.3.1
Local Storage
The local interface is shown as in Figure 4-109. Here you can see HDD information. You can also operate
the read-only, read-write, redundancy (if there are more than on HDD) and format operation.
4.11.4.3.2 HDD
The HDD interface is to set HDD group. See Figure 4-110.
4.11.4.3.3
FTP
Configure FTP information on the FTP interface. See Figure 4-111.
Set the FTP as your remote storage location. System can save record file or snapshot picture to the FTP
once the network is offline or malfunction.
Function
bottom of the interface, current setup is for today only.
Please click Save button and then exit.
Copy function allows you to copy one channel setup to another. After
setting in channel, click Copy button, you can go to interface Figure
4-108. You can see current channel name is grey such as channel 1.
Now you can select the channel you want to paste such as channel
5/6/7. If you want to save current setup of channel 1 to all channels,
you can click the first box "ALL". Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy
function succeeded.
Figure 4-109
Figure 4-110
295