Unisight EmPower NVR User Manual page 291

⚫
Duration setup.
⚫
Sensitivity setup.
⚫
Min gathering zone setup.
⚫
Duration: System can generate an alarm once the object is in the zone for the specified period.
⚫
Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.
Click to draw the rule.
Click OK to complete the rule setup.
For detailed setups, please refer to chapter 4.11.3.1.1 motion detect for detailed information.
4.11.3.3.8 Fast moving
From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click
type as fast moving, you can see the following interface. See Error! Reference source not found..
⚫
Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.
Figure 4-83
, and then select rule
278