Unisight EmPower NVR User Manual page 41

Step 2 Select the 2.4GHz check box and configure the parameters. For details, see following table.
Parameter
2.4GHz
SSID
Encryption
Type
Password
Channel
Gain
3.1.4.4.2 Advanced Settings
This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation.
You can configure the Wi-Fi IP address, subnet mask, default gateway and DHCP derver here.
Step 1 From main menu > Setting > Network > Wi-Fi AP > Advanced.
The Advanced interface is displayed. See Figure 3-21.
Figure 3-20
Function
Select the check box to enable Wi-Fi.
Enter the SSID name. You can use this name to search the device.
Select the encryption type from the dropdown list, including WPA2 PSK, WPA
PSK and OPEN.
Enter the SSID password. You can use this password to connect to the
network.
Select the channel to connect the Wi-Fi IPC.
Adjust the Wi-Fi signal intensity.
28