Unisight EmPower NVR User Manual page 103

Icon
3.6.2.2 Clip
This function allows you to clip some footages to a new file and then save to the USB device. See Error!
Reference source not found.. Please follow the steps listed below.
Step 1 Select a record first and then click
Step 2 Select a time at the time bar and then click
Step 3 Select a time at the time bar and then click
Step 4 Click
Note
⚫
Clip function is for one-channel/multiple-channel.
⚫
Max save 1024 files at the same time.
⚫
This function is not for the file already checked in the file list.
3.6.2.3 Record Backup
This function is to backup files you checked in the file list, or the file you just clip.
Click , enter the following interface. See Figure 3-95.
Function
Note
This function is for some series only.
In 1-channel playback mode, click it to enable/disable display IVS rule
information on the video.
, system pops up dialogue box to save the clip file.
to playback.
to start clip,
to stop clip,
Figure 3-94
90