Remote Device Initialization - Unisight EmPower NVR User Manual

⚫
When you disable backup encryption, the extension name of the exported file is .csv. It
might lead to data leakage.
3.2.1.3 IP Import
Step 1 Click Import button.
Enter the following interface. See Figure 3-39.
Step 2 Select the import file and then click the OK button. System pops up a dialogue box to remind you
successfully imported.
Step 3 Click OK button to exit.
Note
If the imported IP has conflicted with current added device, system pops up a dialogue box to
remind you. You have two options:
Step 4 Click OK button, system uses the imported setup to overlay current one.
Important
⚫
You can edit the exported .CVS file. Do not change the file format; otherwise it may result in
import failure.
⚫
Does not support customized protocol import and export.
⚫
The import and export device shall have the same language format.

3.2.2 Remote Device Initialization

Remote device initialization can change remote device login password and IP address.
Note
⚫
When connect a camera to the NVR via PoE port, NVR automatically initialize the camera. The
Figure 3-39
43