Pos - Unisight EmPower NVR User Manual

Here is for you to set proper alarm output (Auto/manual/stop). Connect the alarm device to the system
alarm output port, and set the mode as auto, system can trigger the corresponding operations when an
alarm occurs.
⚫
Auto: Once an alarm event occurs, system can generate an alarm.
⚫
Manual: Alarm device is always on the alarming mode.
⚫
Stop: Disable alarm output function.
Click OK button of the alarm reset, you can clear all alarm output status.
Please highlight icon
After all the setups please click OK button.

3.7.12 POS

Connect the device with the POS, the device can receive the POS information and overlay corresponding
info on the video.
Note
⚫
For the local-end, this function supports 1/4-window display and 1-window playback.
⚫
This function is for the cashier of the supermarket and etc. The device can get the information from
the POS and then overlay the txt information on the video.
Step 1 From main menu->Setting->System->POS, the interface is shown as below. See Figure 3-159.
Figure 3-158
to select the corresponding alarm output.
147