Unisight EmPower NVR User Manual page 209

3.10.1.3 Security Question
Note
This function is for admin user only.
Here you can change security questions. After you successfully answered security questions, you can
reset admin account password.
From main menu->Setting->System->Account->Security question, the interface is shown as below. See
Figure 3-212. Input correct security answers and then click Delete button at the bottom of the interface,
you can reset security questions and answers.
3.10.1.4 ONVIF User
When the camera from the third party is connected with the NVRvia the ONVIF user, please use the
verified ONVIF account to connect to the DVR. Here you can add/delete/modify user
Note
The default ONVIF user is admin. It is created after you initialize the DVR.
Step 1 From main menu->Setting->System->Account->ONVIF User.
Enter ONVIF interface. See Figure 3-213.
Figure 3-212
196