Unisight EmPower NVR User Manual page 221

3.10.6.2 System Service
The device supports to enable and disable various system internal services.
Step 1 From main menu->System->Security ->System Service.
The System Service interface is displayed. See Figure 3-229.
Step 2 Configure the parameters. For details, see the below table.
Parameter
Password Reset
Mobile Phone Push
CGI
ONVIF
Figure 3-228
Figure 3-229
Description
Enabled by default.
If it is disabled, the user can only use the security questions to reset
the password.
Enabled by default.
The snapped pictures triggered at the device can be push to the
mobile app.
Enabled by default.
The device can be connected via this protocol when enabled.
Enabled by default.
208