Unisight EmPower NVR User Manual page 280

4.11.3.1.3
Tampering
The tampering interface is shown as in Figure 4-67.
After analysis video, system can generate a tampering alarm when the detected moving signal reached
the sensitivity you set here.
For detailed setups, please refer to chapter 4.11.3.1.1 motion detect for detailed information.
4.11.3.1.4
Scene Change
From main window->Setup->Event->Video detect->Scene change, the video diagnosis interface is shown
as in Figure 4-68.
Figure 4-66
Figure 4-67
267