Unit Name And Device Id - Unisight TZHEF08 User Manual

Digital Video Network Surveillance System

5.3 Unit Name and Device ID

Unit name
In the "Display" menu, shown as fig 5.8:
There is an item named "Unit Name". The default unit name is "Embedded Net
DVR". Move "Active Frame" to unit name edit box, press[EDIT]key to enter into edit
status, you can modify the unit name. About how to input characters, please refer to
chapter 3.4. Press[ENTER]key to finish modification. Select "Confirm" button and
press[ENTER], you can save the new unit name and make it into effect. Press
"Cancel" button or[ESC]key to abort modification.
Device ID:
When you use IR controller to operate DVR, you must use device ID to select
DVR. The default device ID of DVR is "255". If there are more than one DVR in one
place, please define different device ID for each DVR. Otherwise, the IR controller
will control all DVR with the same device ID at the same time.
In "Display" menu, move "Active Frame" to the device ID edit box, in the edit
Fig 5.8 Display menu
Unisight Digital Technologies, Inc.
38