Callstate - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

callstate

Sets or gets the call state notification for call state events.
Syntax
callstate <get|register|unregister>
Parameter
get
register
unregister
Feedback Examples
● callstate register
returns
callstate registered
● callstate unregister
returns
callstate unregistered
● callstate get
returns
callstate unregistered
After registering, the following callstate (cs:) data is returned when connecting an IP call:
cs: call[34] chan[0] dialstr[192.168.1.103] state[ALLOCATED]
cs: call[34] chan[0] dialstr[192.168.1.103] state[RINGING]
cs: call[34] chan[0] dialstr[192.168.1.103] state[BONDING]
cs: call[34] chan[0] dialstr[192.168.1.103] state[BONDING]
cs: call[34] chan[0] dialstr[192.168.1.103] state[COMPLETE]
active: call[34] speed [384]
Note: The [BONDING] responses in IP calls are extraneous text that will be
removed in a subsequent software version.
After registering, the following response occurs when disconnecting an IP call:
cleared: call[34]
dialstr[IP:192.168.1.103 NAME:Polycom HDX Demo]
ended: call[34]
See Also
You can also use the notify
For more information about call status messages, refer to 587.
Polycom, Inc.
Description
Returns the current setting.
Registers the system to give notification of call activities.
Disables the register mode.
command on page 360 and the nonotify command on page
System Commands
359 for notifications.
171