Integrator's Reference Manual for Polycom HDX Systems
wanipaddress
Sets or gets the WAN IP address.
Syntax
wanipaddress get
wanipaddress set ["xxx.xxx.xxx.xxx"]
Parameter
set
get
"xxx.xxx.xxx.xxx"
Feedback Examples
● wanipaddress set 192.168.1.101
returns
wanipaddress 192.168.1.101
● wanipaddress get
returns
wanipaddress 192.168.1.101
Comments
The NAT Configuration option on the Firewall screen must be set to Auto, Manual, or UPnP for this option
to be available.
Polycom, Inc.
Description
Sets the WAN IP address when followed by the
"xxx.xxx.xxx.xxx" parameter. To erase the current
setting, omit the "xxx.xxx.xxx.xxx" parameter.
Returns the WAN IP address.
WAN IP address.
System Commands
567