Subnetmask - Polycom RealPresence Group Series Reference Manual

subnetmask

Gets or sets the subnet mask of the system.
Syntax
subnetmask get
subnetmask set ["xxx.xxx.xxx.xxx"]
Parameter Description
Returns the current subnet mask.
get
Sets the subnet mask of the system when
set
followed by the "xxx.xxx.xxx.xxx"
parameter. To erase the current setting, omit
"xxx.xxx.xxx.xxx". This parameter is not
allowed while in a call.
Subnet mask of the system.
"xxx.xxx.xxx.x
xx"
Feedback Examples
● subnetmask set 255.255.255.0
returns
subnetmask 255.255.255.0
● subnetmask get
returns
subnetmask 255.255.255.0
Limitations
None
Comments
After making a change, you must restart the system for the setting to take effect.
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
348