Table of Contents
Advertisement
Integrator's Reference Manual for Polycom HDX Systems
rts
Sets or gets the RTS serial interface control signal (request to send). This command is only applicable if you
have a V.35 network interface connected to your system.
Syntax
rts <get|normal|inverted>
Parameter
get
normal
inverted
Feedback Examples
● rts normal
returns
rts normal
● rts inverted
returns
rts inverted
● rts get
returns
rts inverted
Comments
The default setting is "normal".
Polycom, Inc.
Description
Returns the current setting.
Sets the signal to normal (high voltage is logic 1).
Sets the signal to inverted (low voltage is logic 1).
System Commands
405
Advertisement
Table of Contents
